Smooth Bore

Smooth Bores are the most versatile and value-for-money nozzles. They produce a crystal-clear water effect with exceptional results when illuminated at night. Every Smooth Bore nozzle can be adjusted by 15° off center axis for installation flexibility and water pattern design versatility. Smooth Bores are usually arranged in groups or on spray rings & lines.

An internal flow straightener now comes standard for nozzles ranging from ⅜” up to 1½” inlets. This little accessory aligns water molecules flowing through it, resulting in a more solid looking water stream and more efficient use of the pump’s head. As water flows more aligned, there is less friction, and thus greater spray heights can be achieved with less pressure applied.

Technical Specifications

Smooth Bore Specs

MS 0204 MS 0305 MS 0306 MS 0508 MS 0510 MS 1012 MS 1014
Material Brass Nickel Plated
Stainless Steel AISI 304 or 316 on Request
Brass
Chrome Plated, Stainless Steel
AISI 304 or 316 on Request
Inlet BSP/NPT ¼″ ⅜″ ⅜″ ½″ ½″ 1″ 1″
Nozzle’s Orifice (D) 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 14 mm
Dimensions
A x B in mm
18 x 50 22 x 62 22 x 62 28 x 88 28 x 88 46 x 118 46 x 118
Integrated Swivel Ball Joint ±15° ±15° ±15° ±15° ±15° ±15° ±15°
Spray Height ▼ Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
0.5 m 2.3 | 0.6 3.7 | 0.7 5.4 | 0.7 9.3 | 0.7 15.5 | 0.8 20.8 | 0.5 31.8 | 0.7
0.75 m 2.8 | 1.0 4.9 | 1.0 6.6 | 1.0 11.3 | 0.9 18.8 | 1.2 26.5 | 0.9 38.2 | 1.0
1.0 m 3.3 | 1.2 5.6 | 1.3 7.5 | 1.2 13.2 | 1.2 21.8 | 1.4 30.2 | 1.1 43.4 | 1.3
1.5 m 4.0 | 1.8 6.5 | 1.8 9.3 | 1.8 16.4 | 1.8 27.3 | 2.1 37.8 | 1.8 53.2 | 1.9
2.0 m 4.6 | 2.5 7.5 | 2.4 10.9 | 2.5 19.2 | 2.5 31.3 | 2.9 43.1 | 2.3 60.7 | 2.4
2.5 m 5.2 | 3.1 8.3 | 2.9 12.2 | 3.0 21.7 | 3.2 34.9 | 3.6 47.7 | 2.9 59.3 | 3.1
3.0 m 5.8 | 3.8 9.2 | 3.6 13.5 | 3.7 23.8 | 3.8 38.0 | 4.2 52.3 | 3.5 75.2 | 3.7
3.5 m 6.3 | 4.5 10.0 | 4.1 14.8 | 4.4 25.9 | 4.6 41.5 | 5.0 58.8 | 4.1 82.2 | 4.4
4.0 m 6.9 | 5.2 10.8 | 4.8 15.9 | 5.1 27.7 | 5.2 46.8 | 5.7 60.8 | 4.7 87.1 | 4.9
5.0 m 12.3 | 6.1 18.0 | 6.5 31.0 | 6.4 51.3 | 7.4 68.2 | 5.9 98.9 | 6.3
6.0 m 57.1 | 9.0 76.8 | 7.4 108.7 | 7.7
7.0 m 83.3 | 8.4 120.8 | 9.0
8.0 m 89.3 | 9.6 133.0 | 10.0
10.0 m 100.3 | 12.1 150.2 | 12.6

For 316 Stainless Steel add suffix .L | For 304 Stainless Steel add sufix .304 | For Chrome Plating add suffix .C