Cascade Jet

The most desirable and elegant frothy water effect now is even better. The new Cascade Jet is a heavy duty Stainless Steel injector-type nozzle designed to produce a smooth, yet massive, conical shaped column of highly aerated frothy water. Water and air are mixed inside this robust jet to release a lively, highly visible and wind resistant water column. Whether used in groups or single, these nozzles provide amazing views to every public place.

The pure AISI 304 Stainless Steel construction (or 316 on request) and the inside frictionless design of Cascade Jet offer an excellent flow surface, permitting the use of energy-saving low capacity pumps. In addition, Cascade jet retains all the properties of Stainless Steel against any kind of adversities, offering stylish look, excellent impact resistance, low weight and being literally unaffected by corrosion, tarnishing or rust.

Technical Specifications

Cascade Jet

  MC 100 MC 150 MC 200 MC 300
Material Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Inlet BSP/NPT 1″ 1½″ 2″ 3″
Nozzle’s Orifice 50 mm 80 mm 100 mm 140 mm
Dimensions
A x B in mm
62 x 128 103 x 226 125 x 275 170 x 358
Integrated Swivel Ball Joint Optional ±5° Optional ±5° Optional ±5° Optional ±5°
Suction Strainer Openings Required 4.0 mm 6.0 mm 8.0 mm 10.0 mm
Spray Height ▼ Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
0.5 m 39 | 1.6 63 | 2.0    
1.0 m 55 | 3.0 89 | 4.3 145 | 4.0 311 | 2.9
1.5 m 66 | 4.1 110 | 6.7 169 | 5.2 381 | 4.2
2.0 m 74 | 5.2 125 | 8.6 195 | 6.9 440 | 5.5
2.5 m 82 | 6.3 137 | 10.3 215 | 8.3 496 | 6.8
3.0 m 88 | 7.1 150 | 12.4 231 | 9.7 530 | 7.9
4.0 m   170 | 15.8 262 | 2.6 606 | 10.2
5.0 m     292 | 15.5 673 | 12.4
6.0 m     318 | 18.5 734 | 14.8
8.0 m 370 | 24.5 856 | 19.6
10.0 m 424 | 30.6 982 | 24.5
15.0 m 1197 | 36.8
20.0 m 1412 | 49.1

For integrated ±5° swivel ball joint add suffix .S | For 316 Stainless Steel add suffix .316 | For Male thread add suffix .M