Fizz Jet

Air and water are mixed at the right proportions inside Fizz Jets to produce an utterly impressive, fizzy, foamy water column. The distinctive water shape of Fizz Jets is very rich and sturdy in spray heights of as low as 10 cm up to more than 10 meters; a highly visible and wind resistant water effect suitable to fill any scale areas with shapely, lively white water columns.

Fizz jets are water level independent nozzles, the water shape is not affected by ripples in the pool and the frothiness of each nozzle can easily be adjusted from the internal regulator. In addition, these jets are made of Stainless Steel offering stylish look, excellent impact resistance, low weight and they are remarkably efficient compared to the water effect they create making them one of the best solutions among the foamy nozzles.

Technical Specifications

Fizz Jet

  MZ 050 MZ 100 MZ 150 MZ 200
Material Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Inlet BSP/NPT ½″ 1″ 1½″ 2″
Nozzle’s Orifice (D) 25 mm 32 mm 50 mm 76 mm
Dimensions
A x B in mm
48 x 113 60 x 158 80 x 197 114 x 270
Swivel Ball Joint Optional Optional Optional Optional
Suction Strainer Openings Required 3.0 mm 3.0 mm 4.0 mm 4.0 mm
Spray Height ▼ Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
0.5 m 42 | 1.6 61 | 1.5 125 | 1.2 193 | 1.2
1.0 m 58 | 3.1 83 | 2.7 185 | 2.2 259 | 2.1
1.5 m 70 | 4.4 100 | 4.1 217 | 3.0 320 | 3.2
2.0 m 79 | 6.0 115 | 5.4 245 | 3.7 369 | 4.3
2.5 m 91 | 8.0 127 | 6.3 272 | 4.6 417 | 5.4
3.0 m 100 | 9.2 138 | 7.6 296 | 5.4 454 | 6.5
3.5 m   149 | 8.8 317 | 6.3 493 | 7.3
4.0 m   163 | 10.1 340 | 7.1 550 | 7.7
4.5 m     365 | 8.1 585 | 8.8
5.0 m     384 | 8.9 612 | 9.8
6.0 m     426 | 11.0 670 | 11.7
8.0 m   793 | 13.9
10.0 m   877 | 15.7

For 316 Stainless Steel add suffix .316