Aerating Jet

Aerating Jets create a rigid, frothy column of water. These nozzles have a long, admired history being extremely popular over the past years mainly due to the fact that they are the most efficient foam-creating nozzles. The inner design of Aerating Jets makes excellent use of water flow to transform it to foam. The air-water mixture is easily adjusted, offering a highly customizable water pattern. Fixing the outer sleeve higher makes the mixture richer in air and thus a frothier but shorter effect is created. By lowering it, a higher but leaner stream is achieved.

Aerating jets are now constructed of AISI 304 stainless steel or 316 on request, making them an ideal solution for a customizable, super-efficient, low cost, long lasting frothy fountain.

The handy suction screen accessory is made of stainless steel as well and it is highly recommended to prevent debris from clogging the nozzle’s air intakes.

Technical Specifications

Aerating Jet

  MA 080 MA 102 MA 103 MA 104 MA 105 MA 107 MA 108 MA 110
Material Stainless Steel AISI 304 & Brass
or 316 on Request
Inlet BSP/NPT ¾″ 1″ 1″ 1½″ 2″ 3″ 4″ DN 100
Nozzle’s Orifice (D) 18 mm 24 mm 29 mm 41 mm 52 mm 69 mm 80 mm 102 mm
Dimensions
A x B in mm
280 x 150 250 x 185 280 x 210 345 x 265 400 x 300 510 x 380 565 x 430 640 x 456
Integrated Swivel Male ±15° Male ±15° Male ±15° Male ±15° Female ±5° Female ±5° Female ±5° Flange
Suction Strainer Openings Required 2.0 mm 3.0 mm 3.0 mm 4.0 mm 4.0 mm 5.0 mm 10.0 mm 10.0 mm
Spray Height ▼ Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
1.0 m 13 | 5.0 23 | 4.8            
2.0 m 22 | 12.8 34 | 7.8 39 | 5.4 51 | 4.4 83 | 4.2      
3.0 m 27 | 20.4 43 | 12.5 61 | 10.3 71 | 7.3 99 | 5.2      
4.0 m 33 | 31.2 51 | 19.3 66 | 12.8 82 | 9.8 132 | 8.3      
5.0 m   61 | 24.3 75 | 18.3 92 | 13.2 146 | 11.3      
6.0 m   67 | 30.0 77 | 19.7 105 | 18.3 169 | 14.3      
8.0 m   77 | 40.0 101 | 30.0 113 | 21.4 200 | 18.1 498 | 22.9    
10.0 m   87 | 50.0 118 | 41.8 143 | 31.4 236 | 26.5 532 | 25.3    
15.0 m   153 | 68.0 185 | 53.8 294 | 43.5 589 | 30.3 748 | 27.3 1415 | 24.3
20.0 m     351 | 65.8 683 | 42.5 919 | 39.8 1598 | 33.1
25.0 m     428 | 85.3 779 | 56.8 1086 | 51.8 1878 | 43.7
30.0 m     917 | 73.0 1183 | 64.3 2088 | 52.5
35.0 m     1011 | 89.7 1365 | 93.5 2280 | 63.7

For 316 Stainless Steel add suffix .316 | For Suction Screen add suffix .SCN