Bubbler

Bubbler jet creates a solid, foamy and bulky water mound at lower heights which becomes scattered but still massive, highly aerated and visible at greater spray heights. This kind of nozzles are placed underwater and the water effect depends on surface ripples in addition to how deep the nozzle is installed.

The theory behind Bubbler is taking in air by the snorkel(s), mixing it with water flowing inside the nozzle, pressurizing and directing the mixture upwards which is then enriched by the water above the nozzle, resulting in the unique “bubbler effect” – a wider cascade effect.

Bubbler jets are made entirely of stainless steel AISI 304 (or 316 on request).

Technical Specifications

Bubbler

  MP 150
Single Snorkel
MP 200
Single Snorkel
MP 300
Double Snorkel
Material Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Inlet BSP/NPT 1½″ 2″ 3″
Nozzle’s Orifice (D) 41 mm 53 mm 81 mm
Dimensions
A | B | C | E | F
190 | 365 | 56 | 125 | 135 210 | 430 | 69 | 75 | 180 355 | 527 | 104 | 75 | 242
Integrated Swivel Ball Joint Optional Optional Optional
Suction Strainer Openings Required 5.0 mm 6.0 mm 8.0 mm
Spray Height ▼ Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
0.5 m 127 | 2.0    
1.0 m 165 | 3.3 237 | 2.7 474 | 3.3
1.5 m 195 | 4.5 280 | 3.7 560 | 4.6
2.0 m 221 | 5.6 316 | 4.6 634 | 5.9
2.5 m 242 | 6.7 356 | 5.8 678 | 6.8
3.0 m 266 | 8.2 386 | 6.8 741 | 8.1
4.0 m 293 | 10.2 439 | 8.9 866 | 11.1
5.0 m 307 | 12.2 477 | 11.0 1016 | 13.5
6.0 m   502 | 13.1 1153 | 16.2
8.0 m 1426 | 21.8
10.0 m 1700 | 27.7
12.0 m 1973 | 33.8
14.0 m 2247 | 40.2

For 316 Stainless Steel add suffix .316