Fan

Fan jet is categorized under the truly impressive and charming water shapes. Its nothing-alike 6.0 mm thick water-film pattern catches everybody’s attention in all kinds of applications. The Fan jet is manufactured entirely of 304 Stainless Steel (or 316 on request) and it is one of the best choices for side-water features.

Fan jet’s water effect is displayed best in lower heights and at angles between 35-90 degrees off horizontal axis. For uniform illumination choose wide angle LED luminaires and place them close to the jets pointing at the middle of the stream.

Fan jets are water level independent and water supply must be linear, non-turbulent.

Technical Specifications

Fan

  ML 100 ML 150
Material Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Inlet BSP/NPT 1″ 1½”
Nozzle’s Orifice (C) 4 mm 6 mm
Dimensions
A x B in mm
83 x 120 113 x 166
45° Elbow Included Included
Suction Strainer Openings Required 3.0 mm 8.0 mm
Spray Length ( J ) Height (H) Spread (F) Spread at Max. Height (G) Flow/ Head Height (H) Spread (F) Spread at Max. Height (G) Flow/ Head
[ m ] [ m ] [ m ] [ m ] [Lpm] [ m ] [ m ] [ m ] [ m ] [Lpm] [ m ]
0.5 0.18 0.25 0.20 40.6 0.4 0.20 0.24 0.17 71.3 0.5
1.0 0.32 0.50 0.34 64.3 1.0 0.35 0.44 0.33 106.5 0.8
1.5 0.46 0.80 0.52 83.6 1.6 0.45 0.70 0.50 137.4 1.2
2.0 0.59 1.10 0.70 90.0 2.2 0.60 0.95 0.70 162.3 1.6
2.5 0.70 1.43 0.87 109.8 2.8 0.70 1.05 0.80 186.3 2.0
3.0 0.85 1.80 0.98 123.3 3.4 0.87 1.35 1.00 207.1 2.5
3.5           1.00 1.68 1.10 229.6 2.9
4.0           1.18 1.78 1.20 368.3 3.3

For 316 Stainless Steel add suffix .316