Finger

Finger jets produce a finger-like water pattern which is perfect for perimetrical installation in pools usually accompanying larger water effects. All models can be installed horizontally or vertically and a 45° elbow is included. The water pattern produced by these jets is particularly interesting in every possible angle, so a swivel ball joint is a handy add-on. Finger jets are equipped with 11 or 21 prefixed nozzles in one or two rows and there are three more flexible versions with one row of 9 or 7 adjustable smooth bore nozzles.

Finger jets are made of stainless steel and the nozzles are made of brass, nickel plated, they are water level independent and fine screening at the pump is required.

Technical Specifications

Finger

  MF 101 MF 102 MF 109 MF 117 MF 157
Material Stainless Steel AISI 304 with Brass, Nickel-plated Nozzles
or 316 on Request
Inlet BSP/NPT 1" 1" 1" 1" 1½"
Dimensions
A x B in mm
130 x 170 130 x 170 153 x 170 160 x 170 192 x 190
Spray Angle 60° 60° 0° – 90° 0° – 90° 0° – 90°
Nozzles Type Prefixed Prefixed Adjustable Adjustable Adjustable
Nozzles Specs 11 x ø4.0mm 21 x ø4.0mm 9 x ø4.0mm 7 x ø6.0mm 7 x ø10.0mm
45° Elbow Included Included Included Included Included
Suction Strainer Openings Required 2.0 mm 2.0 mm 2.0 mm 3.0 mm 5.0 mm
Spray Length Spray Height Spread
at Fall
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
1.0 m 0.2 m 1.5 m 21.4 | 0.8 45.4 | 1.4 20.7 | 0.9 35.3 | 1.2 101 | 0.7
1.5 m 0.3 m 2.0 m 26.4 | 1.1 54.2 | 1.9 25.5 | 1.3 42.5 | 1.7 127 | 1.0
2.0 m 0.4 m 2.4 m 31.2 | 1.5 62.0 | 2.4 28.9 | 1.6 50.4 | 2.2 147 | 1.3
2.5 m 0.5 m 2.8 m 35.9 | 1.9 89.7 | 3.0 32.8 | 2.0 57.4 | 2.8 170 | 1.8
3.0 m 0.65 m 3.25 m 40.1 | 2.3 77.1 | 3.7 36.3 | 2.4 63.7 | 3.2 182 | 2.1
3.5 m 0.75 m 4.0 m 43.2 | 2.6 83.8 | 4.3 39.2 | 2.8 69.2 | 3.8 200 | 2.4
4.0 m 0.85 m 4.15 m 46.3 | 3.0 91.0 | 5.0 43.5 | 3.3 74.2 | 4.3 225 | 2.9
5.0 m 1.0 m 4.75 m 53.5 | 4.0 103.5 | 6.5 48.9 | 4.1 82.5 | 5.4 245 | 3.6

For 316 Stainless Steel add suffix .316