Cluster

Cluster creates a clear-water vertical stream through an array of smaller nozzles pointing straight up. The housing of these fountain heads is made entirely of 304 Stainless Steel (or 316 on request) for enhanced aesthetics and extended life cycle. The smaller model (KD 101) is made of solid unibody with hole jets, being an ideal solution for dry-deck fountains as they are totally flat to the surface and the maximum opening is 3mm – totally safe for childrens’ feet. Larger models are equipped with prefixed stainless steel (grade 316L) jets for easier installation and durability.

Cluster fountain heads are water level independent and the use of swivel ball joints is recommended to achieve perfect verticality.

Technical Specifications

Cluster

  KD 101 KD 115 KD 220 KD 240 KD 245
Material Stainless Steel AISI 304 unibody with
hole jets

or 316 on Request
Stainless Steel AISI 304 body with AISI 316L prefixed nozzles
or 316 on Request
Inlet BSP/NPT 1″ 1¼″ 2″ 4″ 4″
No of Nozzles / Nozzles’ Orifice 12 / 3.0 mm 12 / 6.0 mm 24 / 6.0 mm 57 / 6.0 mm 57 / 8.0 mm
Dimensions
A x B in mm
60 x 70 118 x 125 175 x 130 258 x 185 308 x 230
Suction Strainer Openings Required 2.0 mm 3.0 mm 3.0 mm 3.0 mm 4.0 mm
Spray Height ▼ Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
0.5 m 19.3 | 0.7 74 | 0.9 149 | 0.9 353 | 0.9 584 | 0.9
1.0 m 25.2 | 1.6 112 | 1.6 225 | 1.6 534 | 1.6 811 | 1.6
1.5 m 30.8 | 2.3 126 | 2.3 252 | 2.3 598 | 2.4 1006 | 2.4
2.0 m 35.5 | 2.9 143 | 3.0 285 | 3.1 678 | 3.1 1164 | 3.2
2.5 m 39.1 | 3.6 160 | 3.8 320 | 3.8 761 | 3.8 1295 | 4.0
3.0 m 43.9 | 4.4 176 | 4.6 352 | 4.6 836 | 4.7 1433 | 4.9
3.5 m   192 | 5.4 383 | 5.5 910 | 5.6 1555 | 5.6
4.0 m   210 | 6.4 419 | 6.4 996 | 6.5 1661 | 6.6
4.5 m   222 | 7.2 443 | 7.3 1052 | 7.4 1771 | 7.4
5.0 m   237 | 8.6 474 | 8.7 1125 | 8.8 1867 | 8.3
6.0 m   254 | 9.4 508 | 9.5 1205 | 9.6 2082 | 10.2
8.0 m 564 | 12.9 1340 | 13.1 2251 | 13.3

For 316 Stainless Steel add suffix .316