Fleur de Lis

A three tiered flower-like pattern of clear water is produced by Fleur de Lis fountain heads. The ability of these fountain heads to fill large areas with the shapely design of Fleur de Lis in combination with remarkably minimal supply requirements has made them extremely popular for applications ranging from small residential to large commercial fountains.

Fleur de Lis fountain heads are made in smaller models entirely of 304 stainless steel unibody with hole jets for safer dry-deck installation, enhanced aesthetics and extended life-cycle. Larger models’ housing is made of 304 stainless steel and they are equipped with adjustable smooth bores made of brass – nickel plated for design flexibility as the angle of the nozzles can be easily adjusted on site.

All Fleur de Lis fountain heads are water level independent. For the unibody models a swivel ball joint is recommended for quicker installation (for larger models there is no such need as the nozzles are adjustable).

Fleur de Lis

Technical Specifications

 

Fleur de Lis with Hole Jets

Fleur de Lis with Hole Jets

  KC 101 KC 105 KC 110 KC 115
Material Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Stainless Steel AISI 304
or 316 on Request
Inlet BSP/NPT 1" 1" 1" 1¼"
No of Nozzles
(from center outwards)
19
1 / 6 / 12
37
1 / 12 / 24
43
1 / 6 / 12 / 24
19
1 / 6 / 12
Nozzles’ Orifice (mm) 4.0 / 3.0 / 3.0 6.0 / 3.0 / 3.0 6.0 / 3.0 / 3.0 / 3.0 6.0 / 4.0 / 4.0
Dimensions
D x H in mm
60 x 70 80 x 90 90 x 93 118 x 125
Suction Strainer Openings Required 2.0 mm 2.0 mm 2.0 mm 2.0 mm
Spray Height ▼ Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
0.5 m 23.1 | 0.9 33.1 | 0.8 39.1 | 0.7 36.1 | 0.9
1.0 m 29.6 | 1.7 47.6 | 1.5 55.1 | 1.4 51.3 | 1.7
1.5 m 35.8 | 2.5 59.7 | 2.3 69.7 | 2.2 63.1 | 2.4
2.0 m 40.9 | 3.3 69.2 | 3.0 81.3 | 2.9 72.1 | 3.1
2.5 m 46.0 | 4.1 78.0 | 3.8 90.3 | 3.6 81.0 | 3.9
3.0 m 50.3 | 4.9 86.3| 4.6 101.1 | 4.5 89.4 | 4.7
4.0 m 58.8 | 6.6 100.9 | 6.1 117.1 | 6.1 108.0 | 5.8

For 316 Stainless Steel add suffix .316

 

Fleur de Lis with Adjustable Smooth Bore Nozzles

Fleur de Lis with Adjustable Smooth Bore Nozzles

KC 201 KC 220 KC 221 KC 230 KC 231 KC 240 KC 241
Material Stainless Steel AISI 304 Body with Brass Nickel Plated Nozzles
entirely 316 Stainless Steel on Request
Inlet BSP/NPT 1¼" 2" 2" 2½" 3" 4" 4"
No of Nozzles
(from center outwards)
19
1 / 6 / 12
19
1 / 6 / 12
37
1 / 12 / 24
19
1 / 6 / 12
37
1 / 12 / 24
19
1 / 6 / 12
37
1 / 12 / 24
Nozzles’ Orifice (mm) 6.0 / 4.0 / 4.0 10.0 / 6.0 / 6.0 10.0 / 4.0 / 4.0 12.0 / 8.0 / 8.0 10.0 / 6.0 / 6.0 14.0 / 12.0 / 12.0 14.0 / 8.0 / 8.0
Dimensions
D x H in mm
118 x 146 200 x 188 200 x 188 258 x 240 258 x 210 308 x 260 308 x 260
Suction Strainer Openings Required 2.0 mm 3.0 mm 2.0 mm 4.0 mm 3.0 mm 6.0 mm 4.0 mm
Spray Height ▼ Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
Flow | Head
[Lpm] | [m]
1.5 m 58 | 1.9 141 | 2.2 126 | 2.2 235 | 1.9 254 | 2.2 499 | 2.0 448 | 1.9
2.0 m 71 | 2.6 171 | 3.1 151 | 3.1 285 | 2.6 310 | 3.1 623 | 2.5 545 | 2.6
2.5 m 80 | 3.2 191 | 3.8 171 | 3.8 322 | 3.4 346 | 3.8 694 | 3.3 618 | 3.4
3.0 m 89 | 3.9 215 | 4.4 189 | 4.4 362 | 4.0 391 | 4.4 782 | 3.8 694 | 4.0
4.0 m 100 | 5.3 243 | 6.0 215 | 6.0 406 | 5.4 437 | 6.0 867 | 5.2 775 | 5.4
5.0 m   269 | 7.8 237 | 7.8 450 | 6.8 484 | 7.8 964 | 6.6 862 | 6.8
6.0 m   299 | 9.5 265 | 9.5 508 | 8.1 539 | 9.5 1047 | 8.1 951 | 8.1
8.0 m   327 | 12.1 565 | 10.2 587 | 12.7 1097 | 10.8 993 | 10.7
10.0 m       622 | 13.7 626 | 16.5 1158 | 13.8 1040 | 13.4
12.0 m   683 | 16.4 665 | 20.3 1218 | 16.8 1087 | 16.1