Galaxy Hemispheres

Galaxy Hemispheres, just like Spheres create an utterly spectacular, massive and yet delicate at the same time water effect. The water pattern is generated by multiple water discs interlacing a half-dandelion shape. The distinctive shape is visible from long distances and especially when illuminated with single or multicolor illumination the view becomes truly stunning.

Due to the fact that less arms/outlets are used to create a similarly sized effect to the Sphere models, the Hemispheres are considered the efficient option among Galaxies.

When water is not flowing through the arms of Galaxy Hemispheres, they look like sculptures of modern art with their stylish shiny, silver polished finishing.

Technical Specifications

Galaxy Hemispheres

Model

Inlet

BSP/NPT

A

mm

B

mm

C

(suggested)

mm

D

(suggested)

mm

No of Arms

Suction Strainer

Openings Required

mm

Min. Pool Diameter

Recommended

m

Flow Performance
L/min Head [m]
KH 106 2” 600 300 200 400 19 2.0 1.4 95 3.0
KH 108 2” 800 400 200 400 33 2.0 1.75 165 3.0
KH 209 2” 900 450 300 400 25 2.0 2.0 250 7.0
KH 212 2½” 1200 600 300 400 49 2.0 2.5 490 7.0
KH 215 2½” 1500 750 400 400 49 2.0 3.0 490 7.0
KH 320 2½” 2000 1000 400 500 73 2.0 4.0 730 8.0
KH 325 3” 2500 1250 500 500 73 2.0 5.0 730 8.0
KH 430 4” 3000 1500 500 500 125 2.0 6.0 1250 9.0

For 316 Stainless Steel add suffix .316 | Fine screening of water supply is required – 2mm | Flow adjusting valve or bypass valve is required


Galaxy Hemispheres’ Mounting Systems
For Submersible or Dry Pumps

Galaxy Hemispheres

Model

Inlet

BSP/NPT

A

mm

B

mm

C

mm

D

mm

Holes

For Galaxy

Model

BGH 106 2” 535 235 150 205 6 x ø10 KH 106
BGH 108 2” 535 235 150 205 6 x ø10 KH 108
BGH 209 2” 616 235 150 205 6 x ø10 KH 209
BGH 212 2½” 600 480 200 435 8 x ø14 KH 212
BGH 215 2½” 700 480 200 435 8 x ø14 KH 215
BGH 320 2½” 700 480 200 435 8 x ø14 KH 320
BGH 325 3” 800 480 200 435 8 x ø14 KH 325
BGH 430 4” 800 750 200 690 8 x ø18 KH 430